Preferred Specialist

On-site machining for onshore and offshore, fabrication and installation of structures and piping for onshore and offshore, subsea pipeline and structure cutting, and sacrificial anode installation and specialized coatings.

OUR SERVICES

RWNA caters to clients' onshore or offshore needs with our extensive services and one of the largest collections of on-site cold cutting machinery in the Southeast Asian region. With a comprehensive range of offerings, coupled with the convenience and location of our offices and facilities located in close proximity to clients, we always strive to deliver fast and efficient performance for our clients.

All these services are supported by our Innovation and Production Centre (INP) which features:

a) Comprehensive range of CNC machinery
b) Industry-standard software
c) Highly competent R&D department
d) Customized solutions

News & Events

OUR PROJECTS

PROJECT REFERENCES

OUR CLIENTS

A
AKER SOLUTIONS (M) SDN BHD
ANZ ENGINEERING SDN BHD
ASTURI METAL BUILDERS (M) SDN BHD
AL-JAAMI ENG & DEV SDN BHD
AMALGAMATED METAL CORPORATION (M) SDN BHD (AMC)
ALAM DINGIN AIR CONDITIONING ENGINEERING
ALAM SWIBER OFFSHORE (M) SDN BHD
ALLIED MARINE & EQUIPMENT SDN BHD
AANS TECHNICAL & SERVICES SDN BHD
ALTUS OIL AND GAS SERVICES
ANGGERIK LAKSANA SDN BHD
AIR PRODUCTS SPECIALISED PROCESS EQUIPME
ALLSEAS CONSTRUCTION CONTRACTORS S.A.
ALSTOM - TNB JANAMANJUNG SDN BHD

B
BREDERO SHAW (MALAYSIA) SDN BHD
BARMADA MC DERMOTT
BJS OFFSHORE SDN BHD
BASF PETRONAS CHEMICALS SDN BHD
BICARA SEPAKAT SDN BHD
BARISAN SAMUDERA SDN BHD
BUKIT FRASER THERMAL TECHNOLOGY SDN BHD
BUMI FOCUS SDN BHD
BOILERMASTER SDN BHD
BAYU PUNAMA SDN BHD
BAXTECH RESOURCES SDN BHD

C
CAMPBELL ASIA PACIFIC
CANADOIL COATING LTD
CENTRALISE UTILITIES FACILITIES KERTEH
CENTRALISE UTILITIES FACILITIES GEBENG
CARIMIN ENGINEERING SVS SDN BHD
CALIDAD SDN BHD
COMBINE ENGINEERING AND SERVICES
CR ASIA (MALAYSIA) SDN BHD
CKJ ENGINEERING & SERVICES SDN BHD
CORAL ALLIANCE SDN BHD

D
DYNAMIC ENGINEERING & PLANT SERVICES
DIPETRO SYNERGY ENGINEERING SDN BHD
DAYANG ENTERPRISE SDN BHD
DUTA KLASIK SDN BHD
DIALOG PLANT SERVICES SDN BHD
DAN MARINE TRADING SDN BHD
DYNACIATE ENGINEERING SDN BHD
DOMINANT ENERGY SDN BHD

E
ECIS MALAYSIA SDN BHD
EPIC MUSHTARI ENGINEERING SDN BHD
EDARAN FOKUS SDN BHD
EXXONMOBIL EXPLORATION AND PRODUCTION
ECO TOWER SDN BHD
EASTWING CONSTRUCTOR SDN BHD
EMAS-AMS PTE LTD
ELLATEC (MALAYSIA)SDN BHD
EVERSENDAI OIL & GAS (M) SDN BHD
EASTERN SOLDAR ENGINEERING & CONSTRUCTION SDN BHD

F
FPG OLEOCHEMICALS SDN BHD
FUMIKO SDN BHD
FLEXSYS CHEMICALS (M) SDN BHD
FMC WELLHEAD EQUIPMENT SDN BHD
FMC TECHNOLOGIES GLOBAL SUPPLY SDN BHD
FPSO VENTURES SDN BHD

G
GATOM ENGINEERING & SERVICES SDN BHD
GAS PROCESSING PLANTS
GOM RESOURCES SDN BHD

H
HSE RESOURCES SDN BHD
HAMDAN ABDULLAH SDN BHD
HIGHBASE STRATEGIC SDN BHD
HYUNDAI ENGINEERING CO. LTD.

I
IEV ENGINEERING SDN BHD
IMPIAN BUMIRIA SDN BHD

J
JUARA MUDA INDUSTRI SDN BHD

K
KNM OGPET (EAST COAST) SDN BHD
KENCANA HL SDN BHD
KNM PROCESS SYSTEMS SDN BHD
KENCANA JAYAMAS SDN BHD
KENCANA TORSCO SDN BHD
KENCANA PINEWELL SDN BHD
KUASA FLEKSIBEL SDN BHD
KETENGAH JAYA MAINTENANCE & SERVICES
KHD HUMBOLDT WEDAQ
KEJURUTERAAN QKS SDN BHD
KNM EXOTIC EQUIPMENT SDN BHD

L
LOCAL ENGINEERING (M) SDN BHD
LOTTE CHEMICAL TITAN (M) SDN BHD

M
MUSHTARI MAINTENANCE SERVICES SDN BHD
MTBE MALAYSIA SDN BHD
MSET ENGINEERING CORPORATION SDN BHD
M3NERGY JDA SDN BHD
M3NERGY FPSO PERINTIS SDN BHD
MARUBENI ITOCHU STEEL INC.
MARUBENI ITOCHU TUBULARS ASIA PTE LTD
MALAYSIA MARINE AND HEAVY ENGINEERING HOLDINGS BERHAD
MAJUTERA SENDIRIAN BERHAD
MASTER SCAFF SUPPLY SERVICES MAINTENANCE
MALAKOFF CORPORATION BERHAD

N
NEWWIN ENGINEERING PAKA SDN BHD
NUFA ENGINEERING & CONSULTANCY SDN BHD
NEWFIELD PENINSULAR MALAYSIA INC

N
OMBAK MARINE GROUP SDN BHD
OPTIMAL CHEMICAL (M) SDN BHD
O&G WORKS SDN BHD

P
PFCE ENGINEERING SDN BHD
PETRONAS GAS BERHAD
PIONEER ENGINEERING SDN BHD
PETRONAS PENAPISAN TERENGGANU SDN BHD
PETRONAS FERTILIZER (KEDAH) SDN BHD
PETRONAS CARIGALI SDN BHD
PETRA RESOURCES SDN BHD
PETRONAS PENAPISAN MELAKA SDN BHD
POLYPLASTIC ASIA PACIFIC SDN BHD
PETRONAS CHEMICALS LDPE SDN BHD
PETRA RESOURCES SDN BHD
PFCE INTERGRATED FACILITY COMPLEX
PREMIER VIABLE SDN BHD
PETRONAS AMMONIA SDN BHD
PETROFAC MALAYSIA
PFMAP SDN BHD
PIONEER PEGASUS SDN BHD
PETROFAC E&C SDN BHD
PASCA BINA SDN BHD
PUNCAK JAYA PETROLEUM SDN BHD
PBJV GROUP SDN BHD
PARAS SAKSAMA SDN BHD
PROMAT ESM (M) SDN BHD
PETRONAS CHEMMICALS POLYETHYLENE SDN BHD
PETRONAS CHEMMICALS ETHYLENE SDN BHD

Q
QASTURIE OFFSHORE ENGINEERING SDN BHD

R
RP CHEMICAL (M) SDN BHD
RMS ENGINEERING & SERVICES
RED SEA ENGINEERING (M) SDN BHD
RHEA OFFSHORE SDN BHD
ROTOMECH SDN BHD

S
SCIENCE-TECH SOLUTION SDN BHD
SIGUR ROS SDN BHD
SHAPADU ENERGY & ENGINEERING SDN BHD
SAPURA ACERGY SDN BHD
SALURAN PASIFIK SDN BHD
SRIMULTEC ENGINEERING SDN BHD
SERIMAX MALAYSIA
SWIS RESOURCES SDN BHD
SHINKO PLANTECH MALAYSIA BRANCH
SAA ENGINEERING & MARINE SDN BHD
SAIPEM ASIA SDN BHD
SHINEVERSENDAI ENG (M) SDN.BHD.
SAMUDRA OIL SERVICES SDN BHD
SERI DINAMIK ENGINEERING SDN. BHD.
SANKYU (M) SDN BHD
SERBA DINAMIK SDN BHD
SEMI HERMATICS ENGINEERING SDN BHD
SYARIKAT STEELCON SDN BHD

T
TANJUNG MAINTENANCE SERVICES SDN BHD
TRANSWATER API SDN BHD
TURCOMP ENGINEERING SDN BHD
TL OFFSHORE SDN BHD
TMM ENGINEERING SERVICES SDN BHD
TALISMAN MALAYSIA LIMITED
TEPAT TEKNIK SDN BHD
TENAGA TIUB SDN BHD
TARGET ENERGY CO.(M)SDN BHD
TORAY BASF PBT RESIN SDN BHD
TANJUNG OFFSHORE SERVICES SDN. BHD
TTES TEAM & SPECIALIST SDN BHD
TOYO ENGINEERING & CONSTRUCTION SDN BHD
TNB REPAIR AND MAINTANANCE SDN BHD

V
VINYL CHLORIDE (MALAYSIA) SDN BHD
VH ENERGY SDN BHD

W
WING HUP HING ENGINEERING SDN BHD
WELFIELD SERVICES SDN BHD

RECOGNITIONS

CAREERS

We seek dynamic, suitable and qualified individuals for the following positions:

  1. Special Training Programme for New Mechanical Engineering Graduates (Based in Kuantan)

    TRAINING PROGRAMME TITLE:

    • Preparation for Design Engineer

    PURPOSE OF THE TRAINING PROGRAMME:

    • To provide exposure, experience and specific knowledge to new graduates who does not have working opportunity. Maximum of 2 nos. of candidates will be accepted at one time. Place are limited due to computer software availability.

    TRAINING DURATION:

    • Part 1: 6 month
    • Part 2: 6 month

    ALLOWANCE:

    • Part 1: RM500 per month
    • Part 2: RM700 per month

    TRAINING MODULE PART 1:

    • Familiarisation of drafting with Solidwork software
    • Familiarisation with Computer Aided Manufacturing (CAM) software system
    • Familiarisation with conventional and CNC Machines (3 axis milling, lathe, 5 axis machines and turn-mill)
    • Candidate need to attend Final exam/assessment during the final week of the training programme
    • Part 1 certificate will be provided upon successfully complete the training programme part 1

    TRAINING MODULE PART 2:

    • Pre-requisite need to attend and successfully pass Part 1 training module
    • Familiarisation and utilise gear track software to develop gear systems
    • To involve in design new machines and parts guided by RWNA Senior Design Specialist
    • Candidate need to attend Final exam/assessment during the final week of the training programme
    • Another certificate will be provided upon successfully complete the training programme part 2
    • Completion of parts 2 training programme will be considered to be interviewed as Junior Design Engineer at RWNA Engineering Sdn. Bhd., if there is an availability of vacancy position at that time

    REQUIREMENTS:

    • Newly completed Bachelor Degree in Mechanical Engineering (Max with 3 years from the date of Enrolment)
    • Candidate shall never have any working experience before
    • Highly discipline and shall be able to comply with all company rules and regulation
    • Shall treat all company information/modules/computer software which provided during training programme as confidential and solely for learning purpose and strictly not allowed to be published to outsiders
    • Training time as per company office hours and working days
    • Part 1 is the pre-requisite of part 2
    • Any leave absentees shall follow company rules and regulation
    • The company will not provide any other benefit except the above stated allowance
  2. Special Training Programme for Project Engineer (OSS Department) (Based in Kuantan)

    TRAINING PROGRAMME TITLE:

    • Preparation for Project Engineer (OSS Department)

    PURPOSE OF THE TRAINING PROGRAMME:

    • To provide exposure, experience and specific working knowledge to new graduates who does not have working opportunity. Maximum of 3 nos. of candidates will be accepted for this position at one time. Places offered are very limited.

    TRAINING DURATION:

    • Part 1: 6 month
    • Part 2: 6 month

    ALLOWANCE:

    • Part 1: RM500 per month
    • Part 2: RM700 per month

    TRAINING MODULE PART 1:

    • Familiarisation with RWNA Engineering HSE/working culture
    • Familiarisation with Project Engineer scope of works
    • Familiarization with project requirements and the applicable standards
    • Familiarization with Engineering Drawings and Technical specifications
    • Familiarisation with Document Control System
    • Exposure to ISO 9001/18000 international standards
    • Exposure to machine maintenance, assembly and testing
    • Exposure to assist Project Engineer in managing projects
    • Candidate need to attend Final exam/assessment during the final week of the training programme
    • Part 1 Certificate will be provided upon successfully complete the training programme part 1

    TRAINING MODULE PART 2:

    • Pre-requisite need to attend and successfully completed and passed part 1 Training module
    • Familiarisation in participating project meetings
    • Familiarisation in monitor and control of project schedules
    • Familiarisation of the project sites where applicable
    • Familiarisation with technical communication in order to improve in communication with project team, vendors and clients
    • Exposure to Project Costing
    • To involve in coordinating projects and ensure they will be successfully completed
    • Candidate need to attend Final exam/assessment during the final week of the month
    • Another Certificate will be provided upon successfully complete the training programme part 2
    • Completion of parts 2 training programme will be considered to be interviewed as Junior Project Engineer at RWNA Engineering Sd. Bhd., if there is an availability of vacancy position at that time

    REQUIREMENTS:

    • Newly completed Bachelor Degree in Mechanical Engineering (Max with 3 years from the date of Enrolment)
    • Candidate shall never have any working experience before. The intention of this programme is to expose actual working environment to new graduates
    • Highly discipline and shall be able to comply with all company rules and regulations
    • Shall treat all company information/modules/computer software which provided during training programme as confidential and solely for learning purpose and strictly not allowed to be published to outsiders
    • Training time as per company office hours and working days
    • Part 1 is the pre-requisite of part 2
    • Any leave /absentees shall follow company rules and regulations
    • The company will not provide any other benefit except the above stated allowance
  3. Special Training Programme for Project Engineer (Vessel Fabrication/Plant Maintenance) (Based in Kuantan)

    TRAINING PROGRAMME TITLE:

    • Preparation for Project Engineer (Vessel Fabrication/Plant Maintenance)

    PURPOSE OF THE TRAINING PROGRAMME:

    • To provide exposure, experience and specific working knowledge to new graduates who does not have working opportunity. Maximum of 2 nos. of candidates will be accepted for this position at one time.Places offered are very limited.

    TRAINING DURATION:

    • Part 1: 6 month
    • Part 2: 6 month

    ALLOWANCE:

    • Part 1: RM500 per month
    • Part 2: RM700 per month

    TRAINING MODULE PART 1:

    • Candidates will report Senior Project Engineer
    • Familiarisation with RWNA Engineering HSE/working culture
    • Familiarisation with Project Engineer scope of works
    • Familiarization with project requirements and the applicable standards
    • Familiarization with Engineering Drawings and Technical specifications
    • Familiarisation with Document Control System
    • Exposure to ISO 9001/18000 international standards
    • Exposure to assist Project Engineer in managing projects
    • Candidate need to attend Final exam/assessment during the final week of the training programme
    • Part 1 Certificate will be provided upon successfully complete the training programme part 1

    TRAINING MODULE PART 2:

    • Pre-requisite need to attend and successfully completed and passed part 1 Training module
    • Familiarisation in participating project meetings
    • Familiarisation in monitor and control of project schedules
    • Familiarisation of the project sites where applicable
    • Familiarisation with technical communication in order to improve in communication with project team, vendors and clients
    • Exposure to Project Costing
    • To involve in coordinating projects and ensure they will be successfully completed
    • Candidate need to attend Final exam/assessment during the final week of the month
    • Another Certificate will be provided upon successfully complete the training programme part 2
    • Completion of parts 2 training programme will be considered to be interviewed as Junior Project Engineer at RWNA Engineering Sd. Bhd., if there is an availability of vacancy position at that time

    REQUIREMENTS:

    • Newly completed Bachelor Degree in Mechanical Engineering (Max with 3 years from the date of Enrolment)
    • Candidate shall never have any working experience before. The intention of this programme is to expose actual working environment to new graduates
    • Highly discipline and shall be able to comply with all company rules and regulations
    • Shall treat all company information/modules/computer software which provided during training programme as confidential and solely for learning purpose and strictly not allowed to be published to outsiders
    • Training time as per company office hours and working days
    • Part 1 is the pre-requisite of part 2
    • Any leave /absentees shall follow company rules and regulations
    • The company will not provide any other benefit except the above stated allowance
  4. Special Training Programme for Admin Executive (Based in Kuantan/Kuala Lumpur)

    TRAINING PROGRAMME TITLE:

    • Preparation for Admin Executive

    PURPOSE OF THE TRAINING PROGRAMME:

    • To provide exposure, experience and specific working knowledge to fresh graduates who does not have working opportunity. Maximum of 3 nos. of candidates will be accepted for this position at one time. Places offered are very limited.

    TRAINING DURATION:

    • Part 1: 6 month
    • Part 2: 6 month

    ALLOWANCE:

    • Part 1: RM500 per month
    • Part 2: RM700 per month

    TRAINING MODULE PART 1:

    • Candidates will report to Finance Manager (Kuantan) and Sen. Admin Executive (Kuala Lumpur).
    • Familiarisation with RWNA Engineering HSE/working culture
    • Familiarisation with Admin Executive scope of works
    • Familiarization with fixed asset management and record
    • Familiarization with arrangement of all RWNA’s license and policies
    • Familiarization with proper housekeeping & 5s arrangement at rwna office and house
    • Familiarisation with Document Control System
    • Exposure to ISO 9001/18000 international standards
    • Exposure to assist Sen. Admin Executive on managing company’s assets
    • Candidate need to attend Final exam/assessment during the final week of the training programme
    • Part 1 Certificate will be provided upon successfully complete the training programme part 1

    TRAINING MODULE PART 2:

    • Pre-requisite need to attend and successfully completed and passed part 1 Training module
    • Familiarisation participating with third party meeting and dealing with them, especially with local authorities, suppliers, consultants & etc
    • Familiarisation in monitor and control company utilities, stationeries, printing, courier and other related costs
    • Exposure to involve in staff training plan, budget and costing which need to liaise with HRDF in term of approval & claim
    • Exposure to liaise with universities and college regarding placement of industrial training at company with approval by top management
    • Candidate need to attend Final exam/assessment during the final week of the month
    • Another Certificate will be provided upon successfully complete the training programme part 2
    • Completion of parts 2 training programme will be considered to be interviewed as Junior Admin Executive at RWNA Engineering Sd. Bhd., if there is an availability of vacancy position at that time

    REQUIREMENTS:

    • Newly completed Bachelor Degree in Mechanical Engineering (Max with 3 years from the date of Enrolment)
    • Candidate shall never have any working experience before. The intention of this programme is to expose actual working environment to new graduates
    • Highly discipline and shall be able to comply with all company rules and regulations
    • Shall treat all company information/modules/computer software which provided during training programme as confidential and solely for learning purpose and strictly not allowed to be published to outsiders
    • Training time as per company office hours and working days
    • Part 1 is the pre-requisite of part 2
    • Any leave /absentees shall follow company rules and regulations
    • The company will not provide any other benefit except the above stated allowance
  5. Special Training Programme for IT (Based in Kuantan)

    TRAINING PROGRAMME TITLE:

    • Preparation for IT

    PURPOSE OF THE TRAINING PROGRAMME:

    • To provide exposure, experience and specific working knowledge to fresh graduates who does not have working opportunity. Maximum of 1 nos. of candidates will be accepted for this position at one time. Places offered are very limited.

    TRAINING DURATION:

    • Part 1: 6 month
    • Part 2: 6 month

    ALLOWANCE:

    • Part 1: RM500 per month
    • Part 2: RM700 per month

    TRAINING MODULE PART 1:

    • Candidates will report to QAHSE Manager (Kuantan)
    • Familiarisation with RWNA Engineering HSE/working culture
    • Familiarisation with IT scope of works
    • Familiarization with programming language C# and php
    • Familiarization with database management system
    • Familiarization with troubleshooting either desktop computer or laptop
    • Exposure to ISO 9001/18000 international standards
    • Critical thinking is necessary either for customization or develops software
    • Familiarization with design graphic software Adobe Illustrator/Adobe Photoshop
    • Exposure to ERP Software (EPICOR)
    • Candidate need to attend Final exam/assessment during the final week of the training programme
    • Parts 1 Certificate will be provided upon successfully complete the training programme part 1

    TRAINING MODULE PART 2:

    • Pre-requisite need to attend and successfully completed and passed part 1 Training module
    • Familiarisation in monitor and control company utilities such as desktop computer, laptop, multimedia equipment or software
    • Exposure to any version of Windows Server and networking
    • To involve in customization, develop new module and design database for Epicor software guided by IT Personnel
    • Candidate need to attend Final exam/assessment during the final week of the month
    • Another Certificate will be provided upon successfully complete the training programme part 2
    • Completion of parts 2 training programme will be considered to be interviewed as Junior IT Executive at RWNA Engineering Sd. Bhd., if there is an availability of vacancy position at that time

    REQUIREMENTS:

    • Newly completed Bachelor Degree in Science Computer/Information System Management or equivalent (Max with 3 years from the date of Enrolment)
    • Candidate shall never have any working experience before. The intention of this programme is to expose actual working environment to new graduates
    • Highly discipline and shall be able to comply with all company rules and regulations
    • Shall treat all company information/modules/computer software which provided during training programme as confidential and solely for learning purpose and strictly not allowed to be published to outsiders
    • Training time as per company office hours and working days
    • Part 1 is the pre-requisite of part 2
    • Any leave /absentees shall follow company rules and regulations
    • The company will not provide any other benefit except the above stated allowance
  6. Special Training Programme for Storekeeper (Based in Kuantan)

    TRAINING PROGRAMME TITLE:

    • Preparation for Storekeeper

    PURPOSE OF THE TRAINING PROGRAMME:

    • To provide exposure, experience and specific working knowledge to new graduates who does not have working opportunity. Maximum of 1 nos. of candidates will be accepted for this position at one time. Places offered are very limited.

    TRAINING DURATION:

    • Part 1: 6 month
    • Part 2: 6 month

    ALLOWANCE:

    • Part 1: RM500 per month
    • Part 2: RM700 per month

    TRAINING MODULE PART 1:

    • Familiarisation with RWNA Engineering HSE/working culture
    • Familiarisation with Storekeeper scope of works
    • Familiarization with store management
    • Familiarization with equipment repair (electrical & mechanical)
    • Familiarization with proper housekeeping & 5s arrangement
    • Familiarisation with Document Control System
    • To involve material,eq preparation based on MRF (Material Requisition Form)
    • Exposure to ISO 9001/18000 international standards
    • Candidate need to attend Final exam/assessment during the final week of the training programme
    • Part 1 Certificate will be provided upon successfully complete the training programme part 1

    TRAINING MODULE PART 2:

    • Pre-requisite need to attend and successfully completed and passed part 1 Training module
    • Familiarisation in epicor software (stor related module)
    • Familiarisation in store audit & stock count
    • Costing
    • Candidate need to attend Final exam/assessment during the final week of the month
    • Another Certificate will be provided upon successfully complete the training programme part 2
    • Completion of parts 2 training programme will be considered to be interviewed as Storekeeper at RWNA Engineering Sd. Bhd., if there is an availability of vacancy position at that time

    REQUIREMENTS:

    • Newly completed diploma or certification in Engineering field
    • Candidate shall never have any working experience before. The intention of this programme is to expose actual working environment to new graduates
    • Highly discipline and shall be able to comply with all company rules and regulations
    • Shall treat all company information/modules/computer software which provided during training programme as confidential and solely for learning purpose and strictly not allowed to be published to outsiders
    • Training time as per company office hours and working days
    • Part 1 is the pre-requisite of part 2
    • Any leave /absentees shall follow company rules and regulations
    • The company will not provide any other benefit except the above stated allowance
  7. Special Training Programme for Procurement Assistant (Based in Kuantan)

    TRAINING PROGRAMME TITLE:

    • Preparation for Procurement Assistant

    PURPOSE OF THE TRAINING PROGRAMME:

    • To provide exposure, experience and specific working knowledge to new graduates who does not have working opportunity. Maximum of 2 nos. of candidates will be accepted for this position at one time. Places offered are very limited.

    TRAINING DURATION:

    • Part 1: 6 month
    • Part 2: 6 month

    ALLOWANCE:

    • Part 1: RM500 per month
    • Part 2: RM700 per month

    TRAINING MODULE PART 1:

    • This course provides an overview of the procurement functions, the policies relevant to procurement and the roles and responsibilities of key players
    • Familiarisation with Procurement Assistant scope of works
    • Familiarization with project requirements and the applicable standards
    • Familiarization with related document and procurement procedures
    • Familiarisation with Document Control System
    • Exposure to ISO 9001/18000 international standards
    • Exposure to deal with local and international suppliers
    • Exposure to assist Procurement Manager to support project team
    • Candidate need to attend Final exam/assessment during the final week of the training programme
    • Parts 1 Certificate will be provided upon successfully complete the training programme part

    TRAINING MODULE PART 2:

    • Pre-requisite need to attend and successfully completed and passed part 1 Training module
    • Familiarisation in participating project meetings and understand end user needs and requirement
    • Candidate will expose to Global sourcing may be one of the most complex activities you'll encounter as a purchasing professional.
    • Exposure methods of evaluating prices
    • Familiarisation in monitor and control of purchased costing
    • Candidate will expose to selecting a supplier, negotiating payment terms, comparing lease and buy options, or making other typical procurement decisions
    • Build on the professional knowledge in negotiation, cost management, ethics, and provide up-to-date industry information
    • Participants will gain a better understanding of the various phases of the procurement process
    • Candidate need to attend Final exam/assessment during the final week of the month
    • Another Certificate will be provided upon successfully complete the training programme part 2
    • Completion of parts 2 training programme will be considered to be interviewed as Asst. Purchasing at RWNA Engineering Sd. Bhd., if there is an availability of vacancy position at that time

    REQUIREMENTS:

    • Newly completed Degree in Management (any field) (Max with 1 years from the date of Enrolment)
    • Candidate shall never have any working experience before. The intention of this programme is to expose actual working environment to new graduates
    • Highly discipline and shall be able to comply with all company rules and regulations
    • Shall treat all company information/modules/computer software which provided during training programme as confidential and solely for learning purpose and strictly not allowed to be published to outsiders
    • Training time as per company office hours and working days
    • Part 1 is the pre-requisite of part 2
    • Any leave /absentees shall follow company rules and regulations
    • The company will not provide any other benefit except the above stated allowance
  8. Senior Product Design Engineer - 1 position available (Based in Kuantan)

    • Bachelor/Diploma Engineering
    • Good with Solidwork/AutoCAD Software
    • Minimum 7 years working experience
    • Experience in gear design is an added advantage

Interested candidates please write-in with a detailed resume stating educational qualifications, experiences, current and expected salary and a recent passport-sized photograph to hr@rwna.com.my

If you have any inquiries regarding on the careers, don't hesitate to call +609-5839513

Map

DROP US A MESSAGE!

Lot 5.48 5th Floor,
Wisma Central,
Jalan Ampang,
50450 Kuala Lumpur, Malaysia

Phone: +603 2161 4850

Fax: +603 2161 4890

LOCATIONS